您的位置:网站首页 > 公司新闻 > 正文

氟碳漆原装型组成结构的底材制作因素

作者:admin 来源: 日期:2014/12/27 11:14:41 人气: 标签:氟碳漆
氟碳漆湿膜测厚仪推荐必须使用轮规刻度可精确至2μm也符合测试要求,但因该仪器结构所限,只能用于小尺寸试板的测定。
Recommended to use wheel gauge calibration can be accurate to 2 m is also consistent with the test requirements of wet paint film thickness measuring instrument of fluorocarbon, but because of the structure of the instrument is limited, can only be used for the determination of small size specimen.
若用高质量的平整光滑的金属板作为底材,就可改用磁性测厚仪来进行干膜测定,试板面积也可相应增大,进一步提高测试的准确性。2讨论以上介绍的3种方法均可测试涂布率,但由于涂料品种各异,
If a metal plate with high quality smooth as base material, it can be used to determine the magnetic dry film thickness gauge, test plate area can also increase accordingly, to further improve the accuracy of the test. Coating 3 kinds of methods can test 2 discussion of above introduction rate, but because of different varieties of paint,
有常规黏度的有厚浆型的有双组分的使用方法不同,施工要求不同,因此需结合工作实际选择相适应的方法来测定涂布率,以求得尽可能准确的结果。另外,理论涂布率不适用于多孔的材料,
Conventional viscosity has a thick paste type has different two-component use method, construction requirements are different, therefore need to be combined with the actual work selection method adapted to the determination of spreading rate, in order to achieve results as accurate as possible. In addition, theoretical spreading rate is not applicable to porous materials,
如木材、混凝土等表面,而实际涂布率则受到施工方法、表面形状、漆膜厚度、操作技术等因素的影响而有所差别。蜡乳液在水性木器漆中主要起到防粘的效果,同时还有耐磨和增强手感的作用。
As the wood surface, concrete, influence and practical spreading rate is by construction method, surface shape, film thickness, operation and technical factors differ. Wax emulsion mainly to anti sticking effect in water wood paint, also wear and enhance the role of feeling.
水性氟碳漆家具上光油这应该是一个比较新的方向,通常我用的家具上都是通过打蜡来增加其光泽的但是打蜡的工序比较繁琐,家具上涂一层上光油可以保持长久的光泽,同时也减少了定期打蜡的繁琐。
Waterborne fluorocarbon lacquer furniture varnish which should be a new direction, usually I use furniture is through the wax to increase its luster but the waxing process is relatively cumbersome, furniture coated with a layer of varnish can maintain lasting luster, but also reduce the wax regularly tedious.
典型配方:b颜料:钛粉、氧化锌、锌钡一种微粉末状的有色物质。不溶于水或油的介质中,却能均匀地分散于介质中形成均匀的悬浮体。涂布于物体表面,能赋予涂膜遮盖力及颜色。
A typical formula: B pigment: non-ferrous material titanium powder, zinc oxide, zinc barium a powder. Do not dissolve in water or oil medium, but can be uniformly dispersed in the medium of forming uniform suspension. The coating on the surface of objects, and can give the film hiding power and color.
c氟碳漆填料:CaCO3体质颜料,大多不具有遮盖力和着色力的色粉末,其价低,可以加涂膜的厚度,提高涂膜的耐久性、耐磨性及其它机械强度,同时可降低涂料成本。
C fluorocarbon paint filler of CaCO3 pigment, color powder, are not hiding power and tinting strength of its low price, you can add the thickness of the coating film, paint film is improved durability, wear resistance and other mechanical strength, and can reduce the cost of coating.
本文网址:
氟碳漆